SV1320iV5-4DB LS iV5 Drive

LS
SV1320iV5-4DB
* Discontinued model! Ask for new version or replacement!
SV1320iV5-4DB

Price: 10 112,00
In the application which requires a high torque at low speed, the electrical parameters of motor should be properly set for an optimal operation. LS Vector Controlled Inverter of iV5 has two types of autotuning, which are standstill type and rotation type, respectively. 
 
Standstill type autotuning technology of LS allows the autotuning operation to be performed even with the motor shaft directly connected to the load. Especially, this standstill type autotuning is very useful in the lift application because it does not require removal of brake coupling connected to the motor. 
 
iV5 provides various communication interface such as RS 485, DeviceNET, Profibus-DP and Modbus-RTU. When LS PLC is used as an upper level controller, it can be easily interfaced to the iV5. Option card for the encoder pulse division (ENC_DIV) supports the encoder with open collector output and can divide the encoder pulse up to 1/128. Digital input and Analog signal output card (DIAO) can receive the binary speed command from PLC or other upper level controller and has 4 channels of analog signal output. ELIO card enables the lift application software to be available for an optimized lift operation.

 

Additional links:

 Technical documentation and Downloads
 Request additional information and get a price quote
 
  • Official Supply
  • Official Warranty
  • Brand-new products only
  • Express delivery on request
Buy at: € 10 112,00

Technical Specification

Manufacturer: LS
Series: iV5
Model: SV1320iV5-4DB
Application: lifts / cranes
Capacity, kW: 132
Current, А: 264
Main power supply, V: 380-480
Phase: 3
Enclosure: IP00
Overload capacity, % per 1 min.: 150
Acceleration time, sec: 0-6000
Deceleration time, sec: 0-6000
EMC filter: -
Braking unit: -
Analog input: 3
Digital input: 1
Analog output: 2
Digital output: 2
Relay output: -
RS485 (Modbus RTU): optional RS485, Modbus RTU, Profibus-DP, DeviceNet
Starting torque: 150%
PID: PID-Regulation
V/f control mode: -
Vector control with feedback: +
Sensorless vector control: -
Operation temperature, °С: -10.....+40
Dimensions (W x H x D), mm: 530х1000х345
Weight, kg: 122
All either copying or distribution of any material or information from asb-drives.eu website of Advanced Systems Baltic OÜ is forbidden unless it is allowed exclusively upon written authorization by the possessor of rights.
Bonfiglioli Inverters (VFD)
Fuji Electric Inverters (VFD)
Hitachi Inverters (VFD)
LS Inverters (VFD)
Mitsubishi Inverters (VFD)
ABB ACS580
ABB ACS880