Peter Electronic soft starter series VersiStart II (3,5А - 16А)

Peter Electronic

 



Functions:

  • soft acceleration and deceleration 
  • potential-free control input for soft acceleration and deceleration 
  • 3 separately adjustable parameters accel. time, start voltage, decel. time 
  • boost-start selectable 
  • potential-free relay output for operating state - unit bypassed — and failure (optional) 

Distinctive features:

  • two-phase controlled soft starter
  • controlled by microcontroller
  • optimized soft start
  • current and torque reduction during acceleration
  • easy mounting, for snap-mounting on 35mm standard rail
  • integrated bypass relay
  • parameterization by means of three potentiometers
  • no additional control voltage required
  • no mains neutral conductor (N) required
  • economically priced substitute for star-delta starters
  • compact design, 45mm
  • degree of protection IP20


Additional links:

 Technical documentation and Downloads
 Request additional information and get a price quote

Model range

VersiStart II series (3,5А - 16А)

Model Capacity,
kW
Current,
A
Deceleration time, sec Price
VS II 400-3,5 1.5 3.5 0,25-10 189,00 €
VS II 400-6,5 3 6.5 0,25-10 196,00 €
VS II 400-12 5.5 12 0,25-10 211,00 €
VS II 400-16 7.5 16 0,25-10 223,00 €

Peter Electronic soft starter series VersiStart II (3,5А - 16А) typical applications and functions.

- Door and gate drives
- Pumps, ventilators, fans
- Conveying machines, packaging machines
- Transport systems, assembly lines
- Machine applications 

- Soft acceleration and deceleration
- Potential-free control input for soft acceleration and deceleration
- 3 separately adjustable parameters accel. time, start voltage, decel. time
- Boost-start selectable
- Potential-free relay output for operating state - unit bypassed — and failure (optional)

Peter Electronic soft starter series VersiStart II (3,5А - 16А) options (upon request).

- Special voltages 230V and 480V
- Wide voltage range 200-480V with external control supply voltage US 24VDC (B)
- Signalling contact (I) bypass and failure
- Motor-PTC (I)
- Current control (standard at VS II 400-16) (I)
- Heat sink temperature monitoring (I)
- √3 — connection (cost saving via smaller rating)
- Signalling contact (M) (beginning of acceleration until end of deceleration)

Peter Electronic soft starter series VersiStart II (3,5А - 16А) options (upon request).

Dimensions.

Peter Electronic soft starter series VersiStart II (3,5А - 16А) dimensions

- Min. motor load.
20% of the device rated current.
- Acceleration.
Voltage ramp.
- Restart time.
300ms.
- Input resistance control inputs.
10kOhm.
- Contact rating of relay outputs RA1/RA2.
2A / 250VAC / 30VDC.
- Installation class.
4.
- Overvoltage category / pollution degree:
control and auxiliary circuit - II / 2
main circuit -  III (TT / TN-systems) / 2
- Rated impulse strength Uimp:
control and auxiliary circuit - 2,5kV
main circuit - 4kV.
- Rated insulation voltage Ui :
main circuit control 500V
auxiliary circuit 250V.
- Cross-sectional arey for connection (max.):
control terminals - 1,5mm² / AWG 16
power terminals - 2,5mm²/ AWG 14
- Tightening torque (max.):
control terminals - 0,6 Nm / 5 lbs in
main circuit - 0,6 Nm / 5 lbs in
- Ambient / storage temperature.
0°C ... 45°C up to an altitude of 1000m / -25°C ... 70°C.
- Weight / kg.
0,4kg

All either copying or distribution of any material or information from asb-drives.eu website of Advanced Systems Baltic OÜ is forbidden unless it is allowed exclusively upon written authorization by the possessor of rights.
Bonfiglioli Inverters (VFD)
Fuji Electric Inverters (VFD)
Hitachi Inverters (VFD)
LS Inverters (VFD)
Mitsubishi Inverters (VFD)
ABB ACS580
ABB ACS880