Fuji Frenic LIFT Drives

Series for lift and hoisting applications
Fuji Electric


Over the years, Fuji Electric has collected a well established know-how of inverters for lift applications. With this focus in mind, we developed a new inverter, specialized in lift applications with all related requirements: FRENIC-Lift. With FRENIC-Lift LM1S, Fuji Electric is well established in the lift industry, and is ready and well-prepared for the European lift market. Like all Fuji Electric inverters, FRENIC-Lift offers a big variety and many possibilities - and of course finest Japanese high quality. FRENIC-Lift is an ideal inverter for nowadays market of lift applications.

  • Dedicated inverter for lift applications
  • User friendly
  • Low maintenance: Long-life design
  • Speed control accuracy: + 0.01%
  • Current loop bandwidth: 500 Hz
  • Powerful: 200% of rated current for 10 s
  • 4.0 kW to 45 kW (3 ph 400 V supply)
  • 5.5 kW to 22 kW (3 ph 200 V supply)
  • 2.2 kW (1 ph 200 V supply)
  • TP-G1-ELS (multifunctional keypad, 12 languages available)

Additional links:
 Technical documentation and Downloads
 Request additional information and get a price quote


Model range

Frenic Lift (1 phase 220 V)

Model Capacity,
Deceleration time, sec Dimensions
(W x H x D), mm
FRN2.2LM1S-7EA 2.2 11 0-99 150x260x165 reduced!

Frenic Lift (3 phase 220 V)

Model Capacity,
Deceleration time, sec Dimensions
(W x H x D), mm
FRN5.5LM1S-2EA 5.5 27 0-99 220x260x215 reduced!
FRN7.5LM1S-2EA 7.5 37 0-99 220x260x215 reduced!
FRN11LM1S-2EA 11 49 0-99 220x260x215 reduced!
FRN15LM1S-2EA 15 63 0-99 250x400x215 reduced!
FRN18.5LM1S-2EA 18.5 74 0-99 250x400x215 reduced!
FRN22LM1S-2EA 22 90 0-99 250x400x215 reduced!

Frenic Lift (3 phase 400 V)

Model Capacity,
Deceleration time, sec Dimensions
(W x H x D), mm
FRN4.0LM1S-4E 4 9 0-99 150x260x165 665,00 €
FRN5.5LM1S-4E 5.5 13.5 0-99 220x260x215 720,00 €
FRN7.5LM1S-4E 7.5 18.5 0-99 220x260x215 764,00 €
FRN11LM1S-4E 11 24.5 0-99 220x260x215 1 071,00 €
FRN15LM1S-4E 15 32 0-99 250x400x215 1 543,00 €
FRN18.5LM1S-4E 18.5 39 0-99 250x400x215 1 674,00 €
FRN22LM1S-4E 22 45 0-99 250x400x215 1 995,00 €
FRN30LM1S-4E 30 60 0-99 320x550x261 2 721,00 €
FRN37LM1S-4E 37 75 0-99 355x550x270 3 456,00 €
FRN45LM1S-4E 45 91 0-99 355x615x270 3 778,00 €

Fuji Electric vfd FRENIC-Lift has a high performance vector control

- Current response (ACR): 500Hz
- Speed control accuracy: ±0.01%

High overload capacity

- 200% of rated current for 10s*2) (Overload begins from 80% continuous operation with a carrier frequency of 10kHz.)

IM/PMSM common drive

- A single AC Drive can control an induction motor (open/closed loop control) and a synchronous motor (the optional PG interface card is required).

Fuji Electric drive FRENIC-Lift series model variations

FRENIC-Lift AC Drives are available in a series with capacities ranging from 5.5 to 22kW for three-phase 200V model. 4.0 to 45kW for three-phase 400V model. 2.2kW for single-phase 200V model.

Fuji Electric FRENIC-Lift optimum exclusive design for passenger elevators

Applicable to the feedbacks from various pulse generators

- Applicable to the inputs by open collector/complementary output as a standard specification (Encoder power supply is switchable between +12V and +15V.)
- Applicable to the inputs from the 5V line driver as an option
- Applicable to Sin/Cos, Serial interface (EnDat2.1) and Parallel interface (4-bit gray code, UVM 3-bit code)

Fuji Electric inverter FRENIC-Lift Maintenance functions/ Long life design

- DC bus capacitor life: 7 years
- Electrolytic capacitor life on the printed circuit boards: 7 years
- Cooling fan life: 5 years
- Life warning signal
- Recording and display of cumulative operating time
- Recording and display of cumulative operations

Fuji Electric inverter FRENIC-Lift higher performance


- Safety standards EN61800-5-1:2003, EN954-1 Category3
- Sink/source switchable
- RS-485 communications (Modbus RTU) is adopted as standard equipment.
- CAN Bus is adopted as standard equipment.

Fuji Electric frequency inverter FRENIC-Lift Peripheral support tools (Option)

- AC Drive support loader software is provided.
- A multi-function keypad (with backlit LCD) makes it possible to copy or edit the function code data.

Fuji Electric drive FRENIC-Lift motor capacity
All either copying or distribution of any material or information from asb-drives.eu website of Advanced Systems Baltic OÜ is forbidden unless it is allowed exclusively upon written authorization by the possessor of rights.