TDE FLY-SHEAR application

A Shear Knife Mechanism is moved by a timing belt controlled by our OPDE: the drive reads the position and the speed of the material and controls the timing belt movement.

The shear is accelerated to a speed that exactly matches the material speed, then the cutting process starts.
All the movements are defined by S-curves in order to have smooth accelerations and to reduce the wear and tears on components.

Through a Point-to-Point positioning it is also possible to choose between 2 ways of return to the start position:
the shear can return when it completes its cycle and reaches the travel limit or when the cut has taken place.

- Cutting
- Sawing
- Punching
- Welding
- Embossing
- Perforating paper, metal and foil webs, as well as wood or plastics

Back to news list

Popular Series of Variable Frequency Drives

All either copying or distribution of any material or information from website of Advanced Systems Baltic OÜ is forbidden unless it is allowed exclusively upon written authorization by the possessor of rights.
Bonfiglioli Inverters (VFD)
Fuji Electric Inverters (VFD)
Hitachi Inverters (VFD)
LS Inverters (VFD)
Mitsubishi Inverters (VFD)